ATI Graphics Solution Rev. 1

CGA, MDA, Hercules graphics card with Plantronics color capability. Could display CGA, Plantronics and 132x25 column modes on RGB monitors or CGA, MDA, Plantronics, 132x25 and 132x44 column modes on TTL monochrome Monitors. A 25 pin Parallel connector was included on the main PCB and activated with an add-on Parallel or Serial/Parallel module.

CGA, MDA, Hercules and Plantronics

132x25 and 132x44 column modes

128K

B000 - BFFF / 8 BIT

3B0-3DF

9 pin D sub
RCA composite video adapter (9 pin D-sub to RCA)
Light Pen - 6 pin berg
RF Modulator (PC Portable) - 4 pin berg
DB25 Parallel

TTL Monochrome, RGB, Composite RGB

ATI CW-16800-A

# NOTE: For a TTL monitor, switch 1 can be OFF for default RGB  emulation, ON for default monochrome text (recommended setting is OFF).

Switches 7 and 8 have no function.

Sometimes referred to as the Small Wonder based on the packaging and advertising slogan used at the time: "Small card - Small Price: Small Wonder!"

Attached to the Graphics Solution with a 24 pin berg connector located just above the card edge. The Serial interface was attached via ribbon cable and edge type connector located at the top of the add-on module. The add-on module had an 8 DIP switch block for configuring Parallel and Serial port addresses.

• Requires optional Serial/Parallel (Part Number 168229).
• If U4 on the module is unpopulated, the module supports parallel communications only.